Product Description

Parker D1FVE02CC0NM0314

The Parker D1FVE02CC0NM0314 is a high-performance, direct-operated proportional directional control valve from Parker’s renowned D1FV series. It features an NG6 (CETOP 03 / NFPA D03) mounting interface and incorporates integrated onboard electronics (OBE) for precise control signals and simplified system integration, often eliminating the need for a separate amplifier card. This valve is engineered for applications demanding accurate and responsive control of hydraulic fluid direction and flow rate. The specific configuration ’02CC0NM0314′ denotes a particular spool type (02), a nominal flow capacity (C), a 24VDC solenoid coil (C), no manual override (0N), and an M12 electrical connector (M). Parker D1FV series valves are widely used in various industrial hydraulic systems where precision, reliability, and dynamic performance are crucial.

Technical Specifications:

Valve Series: D1FV
Product Type: Proportional Directional Control Valve
Mounting Standard: ISO 4401-03-02-0-94 (NG6 / CETOP 03 / NFPA D03)
Control Type: Direct Operated with Onboard Electronics (OBE)
Spool Code: 02 (Note: The specific function of spool ’02’, such as center condition and metering characteristics, should be verified from the official Parker datasheet for your application.)
Nominal Flow Rate Code: C (Typically corresponds to a nominal flow rate, e.g., around 25 l/min at a defined pressure drop per land. Refer to Parker’s technical documentation for precise flow curves.)
Solenoid Voltage Code: C (Indicates 24VDC)
Electrical Connection: M (M12, 5-pin connector)
Manual Override: 0N (No manual override)
Parker Design Series / Revision: 0314
Maximum Operating Pressure (Ports P, A, B): Typically up to 350 bar (5075 psi) – consult datasheet for exact specification.
Maximum Tank Port Pressure (Port T): Typically up to 210 bar (3045 psi) – consult datasheet for exact specification.
Hydraulic Fluid Compatibility: Designed for mineral oil based hydraulic fluids (HL, HLP). Compatibility with other fluids may require different seal materials.
Seal Material: Standard versions typically use NBR (Nitrile Butadiene Rubber).
Typical Ambient Temperature Range: -20°C to +70°C (-4°F to +158°F) – dependent on version and operating conditions.