Product Description

Parker PV180R1K1T1NMMC

The Parker PV180R1K1T1NMMC is a high-performance variable displacement axial piston pump from Parker Hannifin’s renowned PVplus series. Designed for demanding open-circuit hydraulic systems in both industrial and mobile applications, this pump offers exceptional efficiency, reliability, and low noise operation. It features a robust design with a displacement of 180 cc/rev, right-hand rotation, and SAE C 4-bolt mounting. Equipped with a pressure compensator control, it allows for precise system pressure management. The through-drive capability (SAE C) provides flexibility for multi-pump configurations. This model is configured with FKM seals for compatibility with mineral oil-based hydraulic fluids.

Technical Specifications:

Product Series: PVplus
Pump Type: Variable Displacement Axial Piston Pump
Displacement (Geometric): 180 cm³/rev (11.0 in³/rev)
Rotation (Viewed from Shaft End): Right Hand (Clockwise)
Mounting Flange: SAE C 4-Bolt (conforms to ISO 3019-1 / SAE J744 – 127-4)
Shaft Type: SAE C Keyed Shaft (1-1/4 inch diameter, per ANSI B92.1)
Porting (Pressure/Tank): SAE Code 61 Flanged Ports
Control Type: Pressure Compensator (‘1’ type control)
Through Drive Option: SAE C mounting face and spline
Maximum Continuous Operating Pressure: Typically up to 280 bar (4060 psi) for this series with pressure compensator. Actual setting defined by compensator.
Maximum Intermittent Pressure (Peak): Typically up to 350 bar (5075 psi) for this series. Actual setting defined by compensator.
Maximum Speed (Continuous at full displacement): Refer to Parker technical documentation for specific application limits, generally around 1800-2150 rpm depending on inlet conditions.
Fluid Compatibility: Mineral Oil (HL, HLP)
Seal Material: FKM (Viton)
Design Principle: Swashplate design