Product Description

Parker PV032R1K1AYNMTP

The Parker PV032R1K1AYNMTP is a high-performance variable displacement axial piston pump from Parker’s renowned PVplus series. Engineered for demanding open-circuit industrial hydraulic systems, this pump offers exceptional reliability, high efficiency, and low noise operation. It features a robust design suitable for continuous duty, with a displacement of 32.7 cm³/rev. This specific model is configured for right-hand rotation, utilizes an SAE A 2-bolt mounting flange and keyed shaft, and is equipped with rear ports. The advanced load sensing control combined with a pressure compensator ensures precise flow and pressure regulation, optimizing system performance and energy consumption. Designed for use with mineral oil based hydraulic fluids and sealed with NBR, the PV032R1K1AYNMTP is a versatile solution for a wide range of industrial applications.

Technical Specifications:

Pump Series: PVplus
Pump Type: Variable Displacement Axial Piston Pump
Displacement (Geometric): 32.7 cm³/rev (1.99 in³/rev)
Direction of Rotation: Right Hand (Clockwise, viewed from shaft end)
Mounting Flange: SAE A 2-Bolt (SAE J744, Ø82.55 mm pilot)
Shaft Type: Straight Keyed Shaft (SAE A, Ø19.05 mm, 3/4″ with 4.76 mm key)
Porting Configuration: Rear Ports
Control Type: Load Sensing (Y) with Pressure Compensator (A)
Maximum Continuous Operating Pressure: 280 bar (4060 psi)
Maximum Peak Operating Pressure: 350 bar (5075 psi)
Maximum Continuous Speed (at 1 bar abs inlet pressure): 1800 rpm (higher speeds possible with boosted inlet, consult manufacturer)
Fluid Compatibility: Mineral Oil (HLP)
Seal Material: NBR (Nitrile Buna Rubber)
Through Drive Option: None (N)
Paint Finish: Primed and painted (typically RAL 9006)
Model Code Breakdown: PV032R1K1AYNMTP